What do consider a driver if he would like to bypass the car battery? Not every jumper cables can be reliably used. The cord width should be at least 16 to 24 occupies. To eliminate unnecessary short-circuiting is to take care of well insulated molded connector pliers. The cable length is limited for security reasons. Not all vehicles have built the car battery at the same place so that the cable length is taken into account. It is always better if the aid vehicle has a better car battery. Stand together the vehicles close enough, the batteries can be connected to the Starthilfekabel. Each car battery has a positive and a negative pole (ground). First the Red wire each on both Pluspole stuck, be delineated (black cable) to connect. Before attempting to start first engine of aid vehicle should increase by gas or select the RPM to save battery power up and running. Successful motor starts the jumper cables is first of the minus to solve and then from the Pluspolen. It is advisable to check the battery in the workshops. Case of a malfunction or age of a battery replacement is required.
Share Grandt 31.01.2011 SebastiánView the Original article
No comments:
Post a Comment